Dry carpet Cleaning involves the use of specialized machines to clean carpets with recently developed chemical technologies that permit no-moisture or "very low moisture" (VLM) cleaning, resulting in carpet beautification, and removal of stains, dirt, grit, sand, and allergens. Imagine carpet cleaning system that leaves your carpet dry and ready to entertain instantly. NO CARPET DRY WAIT TIME! Carpet is ready for use right after cleaning, see how this is done:
Step 1: Pre-Inspection
Our technician will walk through your home with you to visually inspect the carpet. He will identify potential permanent stains and give you an evaluation of expected results, as well as listen to any concerns you may have.
Step 2: Commercial Pre-vacuum
This is the key to getting superior results! Dry soil is thoroughly removed by commercial-powered vacuuming. Removing dry soil is one of the most vital and crucial steps in any cleaning process. We pre-vacuum/pile lift the area to be cleaned in several directions.
Step 3: Pre-Treatment
A pre-treatment agent is applied to emulsify and break down traffic area soil and general spots for a more thorough cleaning.
Step 4: Apply HOST Dry Carpet Cleaner
Apply HOST Cleaner by hand or with the HOST Applicator to areas with visible soil, using a basketball-sized handful per square yard.
Step 5: Brush
Turn machine brushes ON and brush in three directions: North and South, East and West and North and South again.
Step 6: Post-Vacuum
Turn machine brushes and vacuum ON and vacuum. Repeat if necessary.
Step 7: Post Spot TreatmentAfter a cleaning there are sometimes spots that remain. Your technician will do everything possible to treat these spots and remove them now.
Step 8: Post Cleaning Inspection
Our technician will walk through your home with you to point out the cleaning results and make sure that you are completely thrilled with the job.